Industrial Source Based CO₂ Recovery Plant operates at ambient conditions. One of the main advantages with this recovery plant is that it requires no external heating to prevent hydrate formation. This CO₂recovery plant is used extensively in industry to remove heavy components such as C3 from fuel gas.

Features

• Temperature and pressure indication of key process variables
• Fully automatic operation
• Touch screen operator interface
• Water flow indicator for safety

• Stainless steel construction
• Valves easily accessible for routine inspection & maintenance
• Data logging
• Allow for auto switchover of towers and operation of hot air regeneration equipment

 

 

Specifications

 

Production Process

• Fermenters produce raw gas that is fed into the system of foam trap for removal of foam
• Booster blower is used to push the gas into the series of scrubbing systems passing through pre water scrubber, KMNO₄ scrubber with dosing facilities
• In this, the CO₂ gas is washed properly using water
• After this, the raw gas is buffered in a vessel
• From there, it enters into the two stage CO₂ compressor for compression up to a desired pressure
• The raw gas is fed into the dual tower activated carbon filter in which its odor is removed completely
• The raw gas is passed through the high pressure precooler into the dual tower CO₂ dryer and then into liquefaction system and nox removal tower
• At the end, the liquid goes directly to the storage tank where the gas stores for a particular period of time