- Minimum Order Quantity: 01 Number
- Capacity: 50 Kg/Hr to 1500 Kg/Hr
- Material: SA516GR70, SS304,SS316L
- Usage/Application: Soft Drinks, Cylinder Fillings, Beverages
- Automation Grade: Automatic
- Brand: Ashirwad
- Production Rate: 50 Kg/Hr to 1500 Kg/Hr
- Pressure: 16.5 Kg/Cm2 G or As per Process Requirement
- Country of Origin: Made in India
Nitrous Oxide Gas Plant Introduction
Safe and economical, the Nitrous Oxide plant from Ashirwad Carbonics (India) Private Limited is a plant with an efficient Generation system which reduces power consumption and adds on to safety. A storage battery assembly for separation of Nitrogen is another safety feature with our Plants. The gas manufactured conforms to all International (European, American, Indian) standards and is stored in liquid state which can be directly filled into cylinders and can be used for different Industry for Different Purposed.
Chemical formula | N2O |
Molecular weight | 44.0128 |
Specific volume at 15°C and 1 atm | 0.533m3/kg |
Specific gravity (air=1) | 1.5297 |
Density at 15°C and 1 atm | 1.877kg/m3 |
Specific heat at 15°C and 1 atm | 0.866kj/kg (°C) |
Nitrous Oxide Plant Process Description
Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of 250 Deg.c. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide & super-heated steam. At the same time impurities are produced including Ammonium Nitrate fumes, Nitrogen & other oxides of Nitrogen. The steam & impurities are removed by scrubbing with water, caustic soda and sulphuric acid in sequence Nitrogen present in traces is removed by bleeding from the top of storage vessels where Nitrous Oxide is stored, after compression by a compressor.
It is produced by heating Ammonium Nitrate to a temperature of approximately 250 C. Heating could be either electrically or by gas. It is then purified in a series of towers before collecting in a gas holder. Gas is then Compressed by a water lubricated compressor, dried and liquefied. Liquid Nitrous oxide is stored in storage vessels where Nitrogen , if present, is removed. Pure liquid Nitrogen oxide is then filled into cylinders by weight.
Ashirwad Carbonics (India) Private Limited Manufactured Nitrous Oxide Consists:-
1. Gas Holder.
2. Melter.
3. Reactor.
4. Condenser.
5. Fully automatic/Manual Gas Dryer System.
6. Gas Compressor.
7. PLC Based Control Panel.
8. Chemical Scrubbers.
9. Cooling Tower.
10. SS Storage Tank (For Storing Liquids).
Salient Features If Our Nitrous Oxide Plants
• Product purity meets world standards.
• Special safety features incorporated in the plant.
• Stainless Steel Construction.
• Decomposer and Melter separately mounted and controlled.
• Online moisture meter installed
• Complete laboratory equipment for testing of gas is provided with plant as standard accessory.
• Double drier provided.
• Skid mounted; modular design occupies less space.
Additional Information:- Item Code: ACIPL001
- Production Capacity: 50Kg/Hr to 1500 Kg/Hr
- Delivery Time: 4 Months
- Packaging Details: Sea Worthy Packing as per International Standards
